Night – Stamping Operator

 

Stamping Operator

  • Perform Setups of Stamping Presses ranging from 32 ton to 200 ton using Standard Work Procedures, work instructions, and machine controlled software. Perform set-ups in a minimum amount of time. Verify the status of the tooling before beginning the set-up process. Safely retrieve and return tooling to the storage area using the proper technique.
  • Simultaneously run a minimum of two primary machines. Responsible for the quality and quantity of products being manufactured. Demonstrate the ability to proficiently operate multiple Primary machines.
  • Perform all material handling duties required to keep a job productive. Safely retrieve materials and return the unused coil/wire stock to the storage areas using an electric hand-cart or fork truck.
  • Proficiently use measuring devices (vernier calipers, micrometers, gage pins, etc.) ensure the highest level of component quality.
  • Demonstrate methodical trouble shooting skills to resolve component quality issues.
  • Maintain excellent housekeeping practices
  • Willing to work overtime as needed, average hours per week are between 50 and 60.
  • Perform duties as assigned by supervisor, and flex to area’s of constraint.
  • All candidates must have the ability to make corrections and solve problems in order to maintain high quality and high production rates.
  • Candidate must work well with other employees in a team environment.
  • Duties also include performing secondary operations such as drill press, de-burring
  • Must be able to understand basic shop math including knowledge  of fraction decimal equivalents

Essential Job Functions:

Employees must be able to function well with regard to the following:

  • Uncontrolled environmental conditions: noise, dust, dirt, mobile equipment, and walking surfaces strewn with materials, power cords and tools is typical.
  • Occasional lifting up to 50 lbs., routine lifting up to 30 lbs., up to 10 times per hour, and pushing / pulling 10 lbs. regularly, 1 to 10 hours per day.
  • Any combination of standing, bending, climbing, balancing, kneeling, crouching, reaching, handling, fingering, feeling and walking 8 to 10 hours per day.
  • Ability to work up to 8-10 hour shifts and overtime as required by the work.
  • Use of all limbs, dexterous and steady use of hands and arms for long periods of time.
  • Simultaneous mental and muscular coordination, visual and audio awareness of surrounding area.

Assembly

ASSEMBLY

  • Ability to assemble fabricated parts at a floor station
  • Test/calibrate parts to meet tolerances
  • Use hand tools and power tools to assemble units according to product specifications
  • Identify units that fail test or tolerance levels and repairs as necessary
  • This position requires working in a manufacturing environment and ability to lift 30 lbs
  • Show up to work daily, on-time and willingness to work over-time.
  • Knowledge of blue print reading and basic math skills

 

Essential Job Functions:

Employees must be able to function well with regard to the following:

  • Uncontrolled environmental conditions: noise, dust, dirt, mobile equipment, and walking surfaces strewn with materials, power cords and tools is typical.
  • Occasional lifting up to 50 lbs., routine lifting up to 35 lbs., up to 10 times per hour, and pushing / pulling 10 lbs. regularly, 1 to 10 hours per day.
  • Any combination of standing, bending, climbing, balancing, kneeling, crouching, reaching, handling, fingering, feeling and walking 8 to 10 hours per day.
  • Ability to work up to 8-10 hour shifts and overtime as required by the work.
  • Use of all limbs, dexterous and steady use of hands and arms for long periods of time.
  • Simultaneous mental and muscular coordination, visual and audio awareness of surrounding area.

Night Shift- Lathe Set-up Machinist

CNC Lathe Machinist

Candidates should possess the following:

  • Machine knowledge equivalent to 2 to +5 years or more of experience setting up and operating CNC lathes.
  • Ability to efficiently perform setups and operate Mazak Lathes via a Mazatrol control is a must.
  • Knowledge of lathe work off-sets, and tool setting is a must.
  • Ability to efficiently perform setups and operate Mazak Lathes via a Mazatrol control is a must.
  • Ability to program swiss machines via G & M code is a plus
  • The ability to set up a multi-tasking machine (Mazak Integrex) is a huge plus.
  • Fluent in reading part drawings (including multiple views and three-dimensional details) required to machine parts from steel, aluminum, copper and plastics.
  • Knowledge of cutting tools and their correct speeds and feeds.
  • All candidates must have the ability to make corrections and solve problems in order to maintain high quality and optimal production rates.
  • Candidate must work well with other employees.
  • Candidate must be willing to work OT as needed.
  • Duties also include performing secondary operations such as drill press, de-burring, etc.

Essential Job Functions:

Employees must be able to function well with regard to the following:

  • Uncontrolled environmental conditions: noise, dust, dirt, mobile equipment, and walking surfaces strewn with materials, power cords and tools is typical.
  • Occasional lifting up to 30 lbs., routine lifting up to 25 lbs., up to 10 times per hour, and pushing / pulling 10 lbs. regularly, 1 to 10 hours per day.
  • Any combination of standing, bending, climbing, balancing, kneeling, crouching, reaching, handling, fingering, feeling and walking 8 to 10 hours per day.
  • Ability to work up to 8-10 hour shifts and overtime as required by the work.
  • Use of all limbs, dexterous and steady use of hands and arms for long periods of time.
  • Simultaneous mental and muscular coordination, visual and audio awareness of surrounding area.

 

 

Night Shift CNC Mill Set-Up

CNC Machinist

CNC Machinist Job Purpose: Produces machined parts by programming, setting up, and operating a computer numerical control (CNC) machine; maintaining quality and safety standards; keeping records; maintaining equipment and supplies.

CNC Machinist Job Duties:

  • Plans machining by studying work orders, blueprints, engineering plans, materials, specifications, orthographic drawings, reference planes, locations of surfaces, and machining parameters; interpreting geometric dimensions and tolerances (GD&T).
  • Plans stock inventory by checking stock to determine amount available; anticipating needed stock; placing and expediting orders for stock; verifying receipt of stock.
  • Programs mills by entering instructions, including zero and reference points; setting tool registers, offsets, compensation, and conditional switches; calculating requirements, including basic math, geometry, and trigonometry; proving part programs.
  • Sets-up mills by installing and adjusting three- and four-jaw chucks, tools, attachments, collets, bushings, cams, gears, stops, and stock pushers; indicating vices; tramming heads.
  • Loads feed mechanism by lifting stock into position.
  • Verifies settings by measuring positions, first-run part, and sample workpieces; adhering to international standards.
  • Maintains specifications by observing drilling, grooving, and cutting, including turning, facing, knurling and thread chasing operations; taking measurements; detecting malfunctions; troubleshooting processes; adjusting and reprogramming controls; sharpening and replacing worn tools; adhering to quality assurance procedures and processes.
  • Maintains safe operations by adhering to safety procedures and regulations.
  • Maintains equipment by completing preventive maintenance requirements; following manufacturer’s instructions; troubleshooting malfunctions; calling for repairs.
  • Maintains continuity among work shifts by documenting and communicating actions, irregularities, and continuing needs.
  • Documents actions by completing production and quality logs.
  • Updates job knowledge by participating in educational opportunities; reading technical publications.
  • Accomplishes organization goals by accepting ownership for accomplishing new and different requests; exploring opportunities to add value to job accomplishments.

Skills/Qualifications: Conceptual Skills, Process Improvement, Verbal Communication, Functional and Technical Skills, Controls and Instrumentation, Supply Management, Tooling, Coordination, Inventory Control, Attention to Detail, Judgment

Essential Job Functions:

Employees must be able to function well with regard to the following:

  • Uncontrolled environmental conditions: noise, dust, dirt, mobile equipment, and walking surfaces strewn with materials, power cords and tools is typical.
  • Occasional lifting up to 50 lbs., routine lifting up to 30 lbs., up to 10 times per hour, and pushing / pulling 10 lbs. regularly, 1 to 10 hours per day.
  • Any combination of standing, bending, climbing, balancing, kneeling, crouching, reaching, handling, fingering, feeling and walking 8 to 10 hours per day.
  • Ability to work up to 8-10 hour shifts and overtime as required by the work.
  • Use of all limbs, dexterous and steady use of hands and arms for long periods of time.
  • Simultaneous mental and muscular coordination, visual and audio awareness of surrounding area.

Night Shift- Saw Operator

Saw Operator

  • Must be able to understand basic shop math including knowledge  of fraction decimal equivalents
  • Fluent in reading part drawings (including multiple views and three-dimensional details) required to machine parts from steel, aluminum, copper and plastics.
  • All candidates must have the ability to make corrections and solve problems in order to maintain high quality and high production rates.
  • Candidate must work well with other employees in a team environment.
  • Duties also include performing secondary operations such as drill press, de-burring, etc.
  • Knowledge of cutting tools and their correct speeds and feeds across an array of many types of materials.
  • Job may require heavy lifting, repetitive movements and long periods of time on feet.
  • Able inspect product using calipers, height gage, square, and tape measure
  • Willing to work overtime as needed, average hours per week are between 50 and 60.
  • Show up to work daily, on-time

 

Essential Job Functions:

Employees must be able to function well with regard to the following:

  • Uncontrolled environmental conditions: noise, dust, dirt, mobile equipment, and walking surfaces strewn with materials, power cords and tools is typical.
  • Occasional lifting up to 50 lbs., routine lifting up to 30 lbs., up to 10 times per hour, and pushing / pulling 10 lbs. regularly, 1 to 10 hours per day.
  • Any combination of standing, bending, climbing, balancing, kneeling, crouching, reaching, handling, fingering, feeling and walking 8 to 10 hours per day.
  • Ability to work up to 8-10 hour shifts and overtime as required by the work.
  • Use of all limbs, dexterous and steady use of hands and arms for long periods of time.
  • Simultaneous mental and muscular coordination, visual and audio awareness of surrounding area.

 

Night Shift- CNC Press Brake Operator

CNC Press Brake Operator

Set-up and operate sheet metal equipment including CNC press brake and other related equipment. Manufacture sheet metal parts according to work order and specifications. Amada experience a plus.

DUTIES
•Performs all activities in a safe manner always utilizing required PPE.
•Sets up and operates equipment that forms sheet metal according to work order and specifications.
•Verifies all parts meet requirements through standard inspection practices.
•Maintains machinery through TPM practices.
•Maintains documentation as required.
•Repairs damaged sheet metal if cost effective.
•Reworks sheet metal to latest revisions, variances or engineering changes if cost effective.
•Performs other duties as assigned.
•Complies with company’s performance and conduct policies.
•Maintains regular work attendance.

QUALIFICATIONS / JOB SPECIFICATIONS:
•Have high school diploma or general education degree (GED) and one year directly related experience or training.
•Be able to read and comprehend blueprints and instructions.
•Ability to use inspection tools.
•Be able to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
•Be able to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to problem solve.
•Have basic PC skills and/or willing to learn.
•Be able to regularly lift and/or move up to twenty-five pounds, frequently lift and/or move up to fifty pounds and occasionally move and /or lift up to seventy-five pounds.

  • Knowledge of tool selection based on part being manufactured
  • Knowledge of calculating flat sizes using material bend allowance
  • Knowledge of fraction decimal equivalents. EX: ¼ = .250, 5/8 =.625
  • Willing to work overtime as needed

 

Essential Job Functions:

Employees must be able to function well with regard to the following:

  • Uncontrolled environmental conditions: noise, dust, dirt, mobile equipment, and walking surfaces strewn with materials, power cords and tools is typical.
  • Occasional lifting up to 65 lbs., routine lifting up to 40 lbs., up to 10 times per hour, and pushing / pulling 10 lbs. regularly, 1 to 10 hours per day.
  • Any combination of standing, bending, climbing, balancing, kneeling, crouching, reaching, handling, fingering, feeling and walking 8 to 10 hours per day.
  • Ability to work up to 8-10 hour shifts and overtime as required by the work.
  • Use of all limbs, dexterous and steady use of hands and arms for long periods of time.
  • Simultaneous mental and muscular coordination, visual and audio awareness of surrounding area.